HPE Networking Instant On 1940 20G 4SFP+ 370W PoE Switch

HPE Networking Instant On 1940 Switch

Smart-Managed Layer 2+ Switch with Multi-Gigabit PoE and 10GbE Uplink

The HPE Networking Instant On 1940 S4A32A is a Smart-Managed Layer 2+ switch for small businesses and organizations that require high-performance networks. It supports Gigabit Ethernet, Multi-Gigabit 2.5GbE, and 10GbE Uplink in a single device, along with a maximum PoE Budget of 370W, supporting a wide range of PoE devices.

20 10/100/1000 Class 4 PoE Ports

Comes with 20 RJ-45 ports, supporting 10/100/1000Mbps speed and IEEE 802.3af/at Class 4 PoE, delivering up to 30W per port. Ideal for Access Points, CCTV cameras, IP Phones, and other PoE devices that require both data transmission and power over a single LAN cable.

4 Smart Rate 2.5GbE Class 6 PoE Ports

Four Smart Rate ports support 100Mbps, 1Gbps, and 2.5Gbps, along with IEEE 802.3af/at/bt Class 6 PoE, delivering up to 60W per port. Ideal for new generation Access Points, high-resolution cameras, and IoT devices that require more bandwidth and power than typical Gigabit PoE ports.

Maximum PoE Budget of 370W

The HPE Networking Instant On 1940 S4A32A is a 4SFP/SFP+ 370W Switch that supports a total PoE Budget of up to 370W, with Class 4 ports supporting up to 30W per port and Class 6 ports supporting up to 60W per port, allowing it to support a large number of PoE devices from a single switch.

4 SFP+ 1/10GbE Ports for Uplink

Equipped with 4 SFP+ 1/10GbE Ports for high-speed Uplink connections, supporting both 1GbE and 10GbE. Ideal for connecting to Core Switches, Servers, Storage, or Network devices that require high bandwidth, increasing system design flexibility and supporting Fiber Connectivity.

140 Gbps Switching Capacity with 104 Mpps Throughput

Supports a high Switching Capacity of up to 140 Gbps and a maximum Throughput of 104 Mpps, efficiently handling large amounts of data traffic within the network. Comes with a 2MB Packet Buffer and a MAC Address Table supporting up to 16,000 Addresses.

Smart-Managed Layer 2+ with Static Routing

Supports Layer 2+ operation with up to 32 IPv4 Static Routes and up to 256 VLANs, allowing flexible network segmentation and traffic routing between networks. Also supports Jumbo Frames up to 9,216 Bytes.

Supports Link Aggregation and IGMP

Supports Link Aggregation with up to 16 Groups, each supporting up to 4 member ports, enhancing bandwidth and connection continuity. It also supports up to 1,000 IGMP Groups for networks utilizing Multicast.

Supports Connectivity for Access Points and CCTV Cameras

With the combination of 10/100/1000 Class 4 PoE ports, Smart Rate 2.5GbE Class 6 PoE, and 4 SFP+ 1/10GbE, the S4A32A is ideal for networks with various types of Access Points, CCTV cameras, IP Phones, and IoT devices, especially systems requiring Multi-Gigabit Connectivity and 10GbE Uplink.

Cloud and Web Browser Network Management

Can be managed via HPE Networking Instant On Cloud, Web Browser, and SNMP Manager, allowing administrators to easily configure, monitor status, and manage the network. HPE Networking Instant On simplifies network deployment and daily system maintenance for small businesses and organizations.

Supports 200–240 VAC with Fixed Fan Cooling System

The device uses an Internal Power Supply supporting 100–127V and 200–240V AC, with two fixed fans and left-to-right airflow. Power Consumption in Idle mode is approximately 18.4W / 18.1W, and Full Traffic is approximately 39.6W / 39.4W, depending on the operating voltage.

Versatile Installation, Supports Deployment Flexibility

Supports installation in standard 19-inch EIA racks, as well as table-top, wall, and under-table mounting. The device dimensions are 36.70 × 44.40 × 4.40 cm and it weighs approximately 4.38 kg, allowing for installation methods to suit offices, network rooms, and network environment conditions.

Ideal for Businesses and Organizations Requiring Multi-Gigabit PoE

The HPE Networking Instant On 1940 S4A32A is suitable for small and medium-sized businesses, offices, hotels, retail stores, and organizations that require a network system supporting Gigabit, 2.5GbE PoE, and 10GbE Uplink, with a 370W PoE Budget, 140 Gbps Switching Capacity, 104 Mpps Throughput, and a Smart-Managed Layer 2+ system that supports future network expansion.